Device Type
Switch - 12 ports - L3 - Managed - stackable
Enclosure Type
DIN rail mountable, wall-mountable
Ports
8 x Gigabit SFP + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+
Performance
Switching fabric bandwidth: 96 Gbps ¦ Forwarding rate: 71.4 Mpps
Capacity
Simultaneous VLANs: 4000 ¦ Virtual interfaces (VLANs): 4094 ¦ Priority queues: 8 ¦ Layer 2 multicast groups: 1023 ¦ Layer 3 multicast groups: 1023 ¦ Packet buffer size: 2 MB
MAC Address Table Size
16K entries
Routing Protocol
IGMP, IGMPv2, IGMPv3, MLD, MLDv2, RIPng, BGP+, OSPFv3, RIP, BGP, OSPF, static IP routing
Remote Management Protocol
NETCONF, RESTCONF, YANG, IPv4, IPv6, SNMP 1, SNMP 6, SSH 6, Telnet, HTTP, HTTPS, RMON 1, RMON 2, RMON 3, RMON 9, CLI, Modbus, TCP/IP, SNMP 2c, SNMP 3, UDP, TLS, TFTP
Encryption Algorithm
MD5, TTLS, SSL 2.0, SSL 3.0, PEAP, TLS, DES, Triple DES, RSA, SHA-1
Authentication Method
RADIUS, TACACS+, Secure Shell v.2 (SSH2), Secure Shell v.3 (SSH3), Extensible Authentication Protocol (EAP), X.509 certificates, Secure Shell (SSH)
Features
OpenFlow support, Active Fiber Monitoring, EPSRing, MACsec support, VCStack, MRP, PROFINET IO diagnosis, UFO, fanless, QoS, sFlow, VLAN mirroring, DHCP snooping, VLAN translation, LLDP-MED, LLDP Neighbor Discovery, reset button, IGMP snooping, MLD, MLD snooping, WRR, VLAN support, port mirroring, AAA, BPDU protection, DoS attack prevention, DAI, IP source guard, 802.1x authentication, ACL support, aluminium/steel housing, ARP support, BOOTP support, flow control, SNTP support, MAC address filtering
Compliant Standards
IEEE 802.2, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, IEEE 802.1ae, IEEE 802.1x, IEEE 802.1p, IEEE 802.1ag, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1ad, IEEE 802.1Q, IEEE 802.1v, IEEE 802.3ac
Status Indicators
Fault, PoE, status, power 1, power 2, stack
Interfaces
8 x 1000Base-X SFP with MACsec ¦ 4 x 1/10GBase-X SFP+ with MACsec ¦ 1 x serial (console) RJ-45 female ¦ 1 x USB 2.0 Type A host ¦ 1 x alarm input 2 pin terminal block ¦ 1 x alarm output 2 pin terminal block
Power Device
External power adapter
Power Redundancy Scheme
1+1
Power Provided
DC 18 - 57 V
Included Accessories
DIN-rail mounting kit, wall mounting kit
Compliant Standards
IP30, IEC 61850-3, EN 50022, EN 60715, FCC, ICES, RCM, UKCA, UL, VCCI, RoHS, China RoHS, REACH, SCIP, TSCA, WEEE, AS/NZS 62368-1, IEC/EN/UL 60950-22, EN/IEC/UL 61010-1, EN/IEC/UL 61010-2-201, IEC/EN/UL 62368-1, CAN/CSA C22.2 No. 60950-22, EN 55035, IEC 61000-6-2, IEC/EN 61000-4-2, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-29, AS/NZS CISPR 32 Class A, CISPR 32 Class A, DNV, EN 50121-4, EN 50125-3, EN 55032, FCC 47 CFR Part 15 B Class A, ICES-GEN, IEC 62236-4, IEEE 1613, NEMA TS-2, IEC 60068-2-27, IEC 60255-21-2, IEC 60255-21-3, ATEX Directive 2014/34/EU, C-UL-US, EN 60079-0, EN 60079-7, IEC 60255-21-1
Software / System Requirements
Software Included
Alliedware Plus
Min Operating Temperature
-40 °C
Max Operating Temperature
75 °C
Humidity Range Operating
5 - 95% (non-condensing)
Min Storage Temperature
-40 °C
Max Storage Temperature
85 °C
Humidity Range Storage
5 - 95% (non-condensing)
Compatibility Information
Designed For
P/N: AT-IE048-120-20, AT-IE048-120-NCA1, AT-IE048-120-NCA3, AT-IE048-120-NCA5, AT-IE048-120-NCES1, AT-IE048-120-NCES3, AT-IE048-120-NCES5, AT-VT-KIT3