Device Type
Switch - 10 ports - L2+ - Managed
Enclosure Type
DIN rail mountable, wall-mountable
Ports
8 x 10/100/1000Base-T + 2 x 1 Gigabit / 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE)
PoE++
Performance
Switching fabric bandwidth: 56 Gbps ¦ Forwarding rate: 41.7 Mpps
Capacity
Buffer capacity (MB): 2 ¦ Priority queues: 8 ¦ Simultaneous VLANs: 4000 ¦ Multicast groups: 1023
MAC Address Table Size
16K entries
Routing Protocol
IGMPv2, IGMP, static IP routing, IGMPv3, MLDv2, MLD, MSTP, RSTP, STP
Remote Management Protocol
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI, NETCONF, RESTCONF, DHCP, YANG, Syslog, MIB
Encryption Algorithm
DES, RSA, MD5, SSL, TLS, SHA-1, PEAP, TTLS, SHA-2, TLS 1.2, 3DES
Authentication Method
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features
Flow control, DiffServ support, surge protection, sFlow, DHCP snooping, ACL support, QoS, DAI, PVST+, reset button, UDLD, fanless, LACP, RSPAN, DoS, OpenFlow support, EPSRing, black hole routing, SCP, BIST, Cable fault locator (TDR), SDN, DDM, Active Fiber Monitoring, AAA, VLAN mirroring, CFM, storm protection, LAG, MRP, BPDU protection, LLDP-MED, IP Directed Broadcast, CCP, UFO
Compliant Standards
IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ag, IEEE 802.3an, IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX, IEEE 802.3bt
Status Indicators
PoE, link/activity, fault, power 1, power 2
Interfaces
4 x 1000Base-T RJ-45 PoE+ - 30 W ¦ 4 x 1000Base-T RJ-45 PoE++ - 60 W ¦ 2 x 1000Base-X/10GBase-X SFP+ uplink ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB 2.0 Type A ¦ 1 x alarm 3 pin terminal block
Power Device
Internal power supply
Features
Redundant Power System (RPS) connector
Included Accessories
Mounting kit
Compliant Standards
UL, VCCI, ICES-003 Class A, UL 2043, FCC, RoHS, WEEE, IEC 60068-2-27, IEC 60068-2-6, ICES, REACH, IEC 60068-2-31, IP30, VCCI Class A, NEMA TS-2, China RoHS, RCM, IEC 60950-22, TSCA, FCC CFR47 Part 15 B Class A, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-29, AS/NZS CISPR 32 Class A, IEC/EN 61000-4-11, IEC/EN 61000-4-2, EN 55032 Class A, CISPR 32 Class A, ITU-T G.8032, EN 55035, IEC/EN/UL 62368-1, IEC/EN 61000-3-3, EN 60715, EN 50021, IEC 62439-2, AS/NZS 62368-1, TEC, IEC 60512-99-002, UKCA, SCIP, UL/CSA 62368-1, EN IEC 61000-3-2
Software / System Requirements
OS Required
AlliedWare Plus
Service & Support
Limited warranty - 5 years
Min Operating Temperature
-40 °C
Max Operating Temperature
75 °C
Humidity Range Operating
5 - 95% (non-condensing)
Min Storage Temperature
-40 °C
Max Storage Temperature
85 °C
Humidity Range Storage
5 - 95% (non-condensing)
- Product Name
- IE220-10GHX
- Manufacturer
- Allied Telesis
- Manufacturer Code
- AT-IE220-10GHX-80
- Switch Type
- Managed
- Switch Layer
- Layer 2+
- Total Ports
- 10
- 10/100/1000T Copper Ports
- 8
- 1/10G SFP+ Ports
- 2
- PoE Enabled Ports
- 8 x PoE+, 4 x PoE++
- Max PoE Power Budget
- 240W
- Switching Fabric
- 56Gbps
- Forwarding Rate
- 41.7Mpps
- MAC Address Table
- 16,000 entries
- Latency
- 11.9µs (100Mbps), 2.78µs (1Gbps), 2.33µs (10Gbps)
- Input Voltage
- 37~57V DC
- Cooling
- Fanless
- Max Power Consumption (No PoE Load)
- 18.5W
- Max Heat Dissipation (No PoE Load)
- 63.3 BTU/hr
- Enclosure
- Aluminium/Sheet Metal shell
- Mounting
- DIN rail, wall mount
- Protection Rate
- IP30
- Dimensions
- 65 x 137 x 155 mm (2.56 x 5.39 x 6.12 in)
- Weight
- DIN rail: 1.60 kg (3.53 lbs), Wall mount: 1.49 kg (3.28 lbs)
⚠ These specifications were sourced from public references and have not been manually verified.
They are provided for general guidance only and may contain inaccuracies.
Always consult official manufacturer documentation before making purchasing decisions.
Elara.ie accepts no liability for errors or omissions in this automatically sourced content.